FTH-2009 SERVICE MANUAL
This manual is intended to serve as a supplement to the FTH-2009 Operating Manual. Specifications and
details of operation and options are provided in the Operating Manual, and are not reprinted herein.
Therefore, this manual is not intended to serve as an independent reference, but to be used in conjunction
with the information provided in the Operating Manual.
Two layout diagrams are provided for each double-sided glass-epoxy circuit board in the FTH-2009. Each
side of the board is identified by the type of the majority of components installed on that side. In most
cases one side has only chip components, and the other has either a mixture of both chip and lead compo
nents (trimmers, coils, electrolytic capacitors, packaged ICs, etc.), or leaded components only.
While we believe the technical information in this manual is correct, Yaesu assumes no liability for damage
that may occur as a result of typographical or other errors that may be present. Your cooperation in
pointing out any inconsistencies in the technical information would be appreciated.
Yaesu Musen reserves the right to make changes in the circuitry of this transceiver, in the interest of
technological improvement, without notification of the owners.
-1-
