FT
DX
9000MP/C
ONTEST
D
ATA
M
ANAGEMENT
O
PERATION
M
ANUAL
U
SING
THE
LBWS
(
L
IMITED
B
AND
W
IDTH
S
WEEP
)
F
UNCTION
LBWS (Limited Band Width Sweep) is a function that sweeps a limited
segment
of the Spectrum Scope span
without
changing
the span (bandwidth). As the sweep segment becomes narrower, the speed becomes faster,
and the accuracy and resolution become enhanced.
The bandwidth can be set to 50 %, 30 %, or 10 % of the full span. The sweep speed will increase as follows:
50 %: about 2 times faster, 30 %: about 3 times faster, 10 %: about 10 times faster
S
PECTRUM
S
COPE
1.
By pressing the [
7/18
](
CTR/FIX
) key repeatedly,
the CTR mode and the FIX mode will be toggled
alternately.
2.
By pressing the [
2/3.5
](
SPAN
) key, you can set
the bandwidth of the span viewed using the Spec-
trum Scope.
By pressing the [
2/3.5
](
SPAN
) key, the span will
change as follows.
25 kHz
Æ
50 kHz
Æ
100 kHz
Æ
250 kHz
Æ
500 kHz
Æ
1000 kHz
Æ
2500 kHz
Æ
25 kHz ......
3.
Press the [
3/5
](
ATT
) key to set the desired at-
tenuation value.
By pressing the [
3/5
](
ATT
) key, the attenuation
will change as follows.
0 dB
Æ
10 dB
Æ
20 dB
Æ
0 dB ......
4.
By pressing the [
6/14
](
LBWS
) key, the LBWS seg-
ment width will change as follows.
NORMAL
Æ
LBWS-1(50%)
Æ
LBWS-2(30%)
Æ
LBWS-3(10%)
Æ
NORMAL ......
5.
Press the [
4/7
](
A/B
) key to select the Main (VFO-
A) or Sub (VFO-B) VFO.
Advice
:Please note that the LBWS feature can not
be used in the FIX mode. Please use LBWS only in
the CTR mode.
While LBWS is engaged, it is not possible to switch
to the dual display mode.
In the case of the Contest version, the [
RX
] switch to
the left of the [
CLAR/VFO-B
] knob will, when pushed,
cause both the VFO itself and the Spectrum Scope
display to change to VFO-B. Additionally, when the
optional
RXU-9000
Dual Receive Unit is installed,
you may use the [
4/7
](
A/B
) key to make this change,
just like on the MP version.
Page 18
Ø
Ï
“LBWS” Select
Ï
“LBWS” Select
