FTA-720 O
perATing
M
AnuAl
8
B
eFore
y
ou
B
egIn
Precautions
The
FTA-720
is capable of two-way communica-
tion on channels used for critical aviation safety
communications. Therefore, it is important that this
radio be kept away from children or other unauthor-
ized users at all times.
When making DC connections via the (optional)
E-
DC-5B
DC cable, be absolutely certain to observe
the proper voltage level and polarity guidelines. Do
not connect this radio directly to any 24 ~ 28 Volt
DC source, nor to AC power of any kind. Connect-
ing the
FTA-720
directly to a source which exceeds
15.0 Volts DC will result in damage to the unit.
Do not dispose of the Li-Ion Battery Pack in a fire.
Do not carry a Li-Ion Battery Pack in your pocket,
where keys or coins could short the terminals. This
could create a serious fire/burn danger, and possibly
cause damage to the Li-Ion pack.
How to Install the Quick Draw Belt Clip
Connect the hanger to the rear of the
FTA-720
, with
the notch pointing directly up, using the supplied
screw (Fig 1). Use only the screw included with the
clip to mount the clip to the back of the
FTA-720
!
Clip the Quick-Draw Belt Clip onto your belt (Fig 2).
To install the
FTA-720
into the Quick-Draw Belt
Clip, align the hanger with the Quick-Draw Belt
Clip, and slide the
FTA-720
into its slot until a click
is heard (Fig 3).
To remove the
FTA-720
from the Quick-Draw Belt
Clip, rotate the
FTA-720
180 degrees, then slide the
FTA-720
out from the Quick-Draw Belt Clip (Fig 4).
Fig 1
Fig 2
Fig 3
Fig 4