Yaesu FTA-450L Operating Manual Download

Page: 71 / 96

Waypoint Navigation (FTA-750 Only)

Setting the Destination

When the radio enters the NAVI mode for the first time,

or if you have reached the destination during the NAVI

mode last time, the

NAVI

menu will be displayed after

selecting “

NAVI

” on the

screen.

Selecting from the memory

1. Select “

MEMORY

” on

the

NAVI

menu by press-

ing the [

◄

] or [

►

] key,

and then press the [

ENT

]

key.

HISTORY

MEMORY

MANUAL

NAVI

2. Select a group that the

desired station is as-

signed by pressing the

[

◄

] or [

►

] key, and

then press the [

ENT

]

key.

NAVI

MEMORY

ALL

FLAG

GP1:GROUP1

GP2:GROUP2

GP3:GROUP3

GP4:GROUP4

3. Select a station from the

station list of the group

by pressing the [

◄

] or

[

►

] key, and then press

the [

ENT

] key.

ALL

NAVI

Los Angeles

McCarran

Lakeland

KLGB

KLAK

KSAN-VOR

MIAMI

MEMORY

The information of the

selected station will ap-

pear with the reversed

“

GOTO

” displayed at the

bottom.

Name:

KLAK

Freq.:127.600

MHz

Group:ALL

LAT 33

56.325

LON 118

24.225

NAVI

GOTO

4. Press the [

ENT

] key.

The compass screen will be displayed.

Selecting from the history



Select “

History

” on the

NAVI

menu, and then select

and set the desired station in the same way as steps 3

and 4 above.

Summary of Contents for FTA-450L

































































































Search results

Summary of Contents for FTA-450L

Reviews:

Related manuals for FTA-450L

Brands by name

Popular brands

Yaesu FTA-450L, Operating Manual

Search results

Summary of Contents for FTA-450L

Reviews:

Related manuals for FTA-450L

Brands by name

Popular brands