background image

55

Memory Operation

  Press the [

BACK

] key 

to cancel the changes or 

inputs.

Note

You cannot store weather channels to the memory by 

pressing the [

SAVE

] key during the WX mode. 

Maintenance of the Memory

Adding new addresses, editing the stored information, 

and deleting the stored addresses are allowed through 

the SETUP mode.

Adding entries

1.  Press the [

MENU

] key to display the 

MENU

 screen.

2. Select “

SETUP

” on the screen by pressing the [

] or 

[

] key, and then press the [

ENT

] key.

3.  S e l e c t   “

M E M O R Y 

BOOK

” on the screen by 

pressing the [

] or [

key, and then press the 

[

ENT

] key.

4. Select  “

ADD

” by press-

ing the [

] or [

] key, 

and then press the [

ENT

key.

ADD

EDIT

DELETE

GROUP NAME

MEMORY BOOK

5.  Select the item, input 

letters and/or numer-

ics, select a setting, and 

store the changes in the 

same way as the instant 

storage described previ-

ously.

Name:

 001MEMORY_______

Freq.:---.---

MHz

Group:ALL

LAT   --

˚

--.---

-

LON  ---

˚

--.---

-

MEMORY BOOK

Summary of Contents for FTA-450L

































































































Reviews: