Yaesu FT5Dr Page 49 Operating Manual Download

Page: 49 / 80

5. Rotate the

DIAL

knob to select the desired Bluetooth

device.

6. Touch [

CONNECT

SSM-BT10

SSM-BT10
yaesu-01
yaesu-02

yaesu-03

R556

7. When pairing is complete and connected, the

Bluetooth

headset model name is displayed.

SSM-BT10

: LED blinks blue.

8. Press the

PTT

switch to return to the normal operation.

While connected to a Bluetooth

headset, the “

” icon lights up on the FT5DR/DE

screen, and the received audio and operation beep will be heard from the Bluetooth

headset.

Disable the Bluetooth function

To cancel Bluetooth

operation, just repeat the above procedures, selecting “OFF” in

step 4 above.

Subsequent Bluetooth

headset connection when the power is turned ON

⿠

When the power is turned OFF while the Bluetooth

headset is connected, the next

time the power is turned ON, the same Bluetooth

headset is searched for and auto-

matically connected when found.

⿠

If the Bluetooth

headset cannot be found, the “

” icon flashes on the screen.

If the power of the same Bluetooth

headset is turned ON in this state, it will connect

automatically. If not, turn the FT5DR/DE and Bluetooth

headset OFF and then ON

again.

⿠

To connect to other Bluetooth

headsets, refer to the “Connect with another Bluetooth

headset” on page 49.

Summary of Contents for FT5Dr

















































































Search results

Summary of Contents for FT5Dr

Reviews:

Related manuals for FT5Dr

Brands by name

Popular brands

Yaesu FT5Dr, Operating Manual

Search results

Summary of Contents for FT5Dr

Reviews:

Related manuals for FT5Dr

Brands by name

Popular brands