13
If smoke or a strange odor is emitted from
the main body, battery pack, or battery char-
ger, immediately turn the transceiver off;
remove the battery pack, and remove the
power plug from the outlet.
A fire, chemical leak, overheating, component
damage, ignition, or failure may result. Contact
the dealer from which you purchased this product
or Yaesu.
Do not bend, twist, pull, heat or modify the
power cord and connection cables in an un-
reasonable manner.
This may cut or damage the cables and result in
fire, electric shock and equipment failure.
Do not pull the cable when plugging and
unplugging the power cord and connection
cables.
Always hold the plug or connector when unplug-
ging; if not, a fire, electric shock and equipment
failure may result.
Do not use the device when the power cord
and connection cables are damaged, or when
the DC power connector cannot be plugged
in tightly.
Contact Yaesu or the retail store where this
transceiver was purchased for assistance, as
this may result in fire, electric shock and equip-
ment failure.
Do not install the transceiver or the wire ca-
bles near the automobile air bags.
In case of an accident, the transceiver may
interfere with air bag deployment and result in
extreme injury. The wire cables may also cause
the air bag to malfunction.
Do not make very long transmissions.
The main body of the transceiver may overheat,
resulting in component failure or operator burns.
Do not place the transceiver in wet or damp
areas (e.g. near a humidifier).
This may result in fire, electric shock and equip-
ment failure.
Do not use DC power cords other than the
one enclosed or specified.
This may result in fire, electric shock and equip-
ment malfunctions.
When connecting a DC power cord, be cer-
tain the positive and negative polarities are
correct.
Reverse connection will result in equipment
damage.
When transmitting, keep the transceiver at
least 5.0 mm (3/16 inch) away from your body.
Use only the supplied antenna. Do not use
modified or damaged antennas.
Disconnect the power cord and connection
cables before installing separately sold ac-
cessory items.
This may result in fire, electric shock and equip-
ment failure.
Follow the instructions provided when in-
stalling items sold separately.
This may result in fire, electric shock and equip-
ment failure.
Use only the provided or specified screws.
Using screws of a different size, may result in
fire, electric shock and component damage.
Do not place the transceiver in a confined
space, such as a bookshelf which is not ven-
tilated well.
This may result in overheating and fire, electric
shock and equipment failure.
Do not operate the transceiver on a carpet or
a blanket.
This may result in overheating and fire, electric
shock and equipment failure.
If a foreign substance is spilled into the
transceiver, turn it OFF immediately and re-
move the power plug from the outlet.
If used as it is, a fire, electrical shock, or dam-
age may result.
CAUTION
Do not place the transceiver on an unsteady
or sloping surface, or in a location with ex-
treme vibration.
The transceiver may fall or drop, resulting in fire,
injury and equipment damage.
Do not place this transceiver in a humid or
dusty place.
A fire or failure may result.
Do not use the transceiver near the radio re-
lay equipment.
Transmissions may affect radio communica-
tion.
Do not wipe the case using thinner and ben-
zene etc.
Use only a soft, dry cloth to wipe stains from the
case.
Do not throw the transceiver, or subject it to
strong impact forces.
Physical abuse may result in component dam-
age and equipment failure.
If the transceiver will not be used for an extend-
ed period, turn it OFF and remove the battery
pack for safety.
Keep magnetic cards and videotapes away
from the transceiver.
The data recorded on cash cards or videotapes
may be erased.
Do not place this transceiver in direct sun-
light or near a heater.
The case may be deformed or discolored.
Do not operate the transceiver near the TV or
radio.
Radio disturbance can occur in the transceiver,
the TV, or the radio.
