Yaesu FT5De Operating Manual Download Page 2

Page: 2 / 80

Introduction .....................................................2
Quick Guide ....................................................3
Controls & Connections ................................4

Transceiver ....................................................4

Operation Keys ..............................................5

Changing the Transceiver settings ................5

Touch Screen Display ...................................6

Safety Precautions (Be Sure to Read) ........12
Supplied Accessories and Options ............15

Supplied Accessories .................................. 15

Available Options......................................... 15

Preparation....................................................16

Installing the Antenna .................................. 16

Installing the Battery Pack .......................... 16

Attaching the Quick Release Holster .......... 16

Attaching the Belt Clip ................................. 16

Charging the Battery Pack...........................17

Charging the Battery Pack using the

Battery Charger (SAD-25) ........................... 17

Charging the Battery Pack using the

Rapid Charger (CD-41) ............................... 17

External Power Supply.................................18

Connecting an External Power Supply for

Use in a Vehicle ........................................... 18

Connecting to an External Power Supply

Using a Power Cable ................................... 18

Using a microSD Memory Card ...................18

Usable microSD Memory Cards ................. 18

Mounting and Dismounting microSD

Memory Card ............................................... 18

Formatting a microSD Memory Card .......... 19

Operation .......................................................20

Turning the Transceiver ON ........................20

Adjusting the Volume Level .........................20

Adjusting the squelch setting ...................... 21

Toggling the Operating Band ...................... 21

Selecting a Frequency Band .......................22

Tuning to a Frequency .................................22

Changing the Frequency Step.....................23

Selecting the Communication Mode ...........23

Transmission ...............................................24

Changing the Transmit Power Level ...........25

Locking Keys and DIAL knob ......................25

Using the convenient Digital C4FM feature ... 26

About the Digital Group ID (DG-ID) feature 26

Communicating with the DG-ID feature ......26

Repeater Operation ......................................29

Communicating Via the Repeater ...............29

Using the Memory ........................................30

Registering to Memory Channels................30

Recalling a Memory Channel ...................... 31

Recall only memories in the

same frequency band (Band) using the

memory auto grouping (MAG) function ....... 31

Clearing Memories ......................................32

Restored erased memory ............................32

Using Memory Tag ......................................32

Recalling the Home Channels.....................33

Changing the Home Channel Frequency ....33

Memory Channel List ..................................33

Split Memory ...............................................33

Using Memory Bank ....................................33

Memory Only Mode .....................................33

PMG (Primary Memory Group

Activity Monitor) ...........................................34

Touch the bar graph to switch the

frequency .....................................................35

Unregister the channel (frequency)

registered in PMG........................................35

Disable the PMG function ...........................35

CAM (Channel Activity Monitor) function .. 36

Using the CAM function ..............................38

Touch the bar graph to switch the

frequency .....................................................38

Change the displayed CAM group ..............38

Delete a registered memory channel from

CAM group...................................................39

Delete all the contents in the

CAM group at once......................................40

Changing the name (tag) of CAM group .....40

Disable the CAM function............................ 41

Band Scope ...................................................42
Scanning Function .......................................43

VFO Scan ....................................................43

Memory Channel Scanning .........................43

Setting the Receive Operation When

Scanning Stops ...........................................44

Weather Alert Scan .....................................44

Skip Memory Channels, and

Specified Memory Channels

.......................45

Programmable Memory scan (PMS) ...........45

Dual Receive (D.RCV) feature ....................45

Convenient Functions ..................................46

Bluetooth

Operation ...................................46

VOX Operation ............................................50

Convenient Preset Receiver

Memory Channels .......................................52

Contents

Summary of Contents for FT5De

















































































Search results

Summary of Contents for FT5De

Reviews:

Related manuals for FT5De

Brands by name

Popular brands

Yaesu FT5De, Operating Manual

Search results

Summary of Contents for FT5De

Reviews:

Related manuals for FT5De

Brands by name

Popular brands