20
Split Memory
Two different frequencies, one for receive and another for transmit, may be registered to
a memory channel.
1. Register the receive frequency to a memory channel
first.
•
For additional details on registering to a memory
channel, refer to the Operating Manual “Registering to
Memory Channels”.
2. Set the transceiver to the desired transmit frequency.
3. Touch and hold [
F MW
].
4. Rotate the
DIAL
knob to select the channel number that
the receive frequency was registered to on step1.
5. While pressing and holding the
PTT
switch, press the
[
M.WRITE
] key.
•
The beep sounds and the split memory is saved.
•
While recalling the split memory, “ ” is displayed on
the LCD.
Registering the receive
frequency.
Registering the transmit
frequency.
Recalling the split memory
While operating the split memory, touch [
F MW
]
[
REV
]
, to reverse the transmit and receive
frequencies temporarily. When reversing the frequencies,“ ” will blink.
