13
CAM (Club Channel Activity Monitor) function
Up to 10 groups with 5 channels each, of frequently used memory channels* may be
registered, and then while receiving the current frequency, the status (signal strength) of
the selected group of memory channels may be displayed. It is easy to identify on which
channel the communication was made.
When a memory channel on the graph is touched, it will become the center operating
frequency, so communication with friends may begin immediately.
* Only channels in the frequency range of 108 MHz to 579.995 MHz may be stored.
YAESU
Currently selected memory channel
(displayed in yellow)
Touch the bar graph, it will
be the transmit/receive
frequency.
Memory channel number
currently selected
CAM memory channel tag display
Memory channel tag
Display in gray even if the received signal is lost
CAM Group tag display
Return to the frequency before memory channel selection
CAM Group selection
Register memory channel to CAM group
1. Touch [
F MW
]
[
CAM
]
.
•
If [
CAM
] is not displayed, touch [
FWD →
] to display [
CAM
] and then touch it.
•
The CAM screen is displayed.
2. Touch [
GROUP
], and then turn the
DIAL
knob to select
the group (CAM1 to 10) to be registered.
YAESU
3. Touch [
MEMBER
].
A list of memory channels registered to the CAM group
is displayed.
2 GROUP 02
3 GROUP 03
4 GROUP 04
1 GROUP 01
4. Touch [
ADD
].
G1-2 5 439.700.00
G1-3 6 432.500.00
G1-4 ----------------
G1-1 1 145.30.00
