background image

84

Set Mode: SD CARD Menu Operations

1 Saving/Loading Data to/from microSD Memory Card

Settings information can be saved to a microSD memory card, also the saved informa-

tion can be loaded to the transceiver.
1.  Press and hold the [

DISP

] key, and then touch [

SD CARD

].

2.  Rotate the 

DIAL

, then touch [

1 BACKUP

].

3.  Rotate the 

DIAL

 knob to select the operation to be performed.

Write to SD

Saves the transceiver setting information to a microSD memory 

card.

Read from SD

Loads the information to the transceiver from a microSD memory 

card.

4.  Press the [

DISP

] key.

A pop-up window appears on the LCD.

5.  Touch [

OK

] twice.

6.   When  [

Write to SD

] is selected and data writing completes, a beep sounds and 

“COMPLETED” appears on the LCD.

7.   When  [

Read from SD

] is selected and data reading completes, a beep sounds, 

then the transceiver restarts with the settings read from the microSD memory card 
applied.

2 Saving/Loading Memory Channel Information to/from 

microSD Memory Card

Memory channel setting information can be saved onto a microSD memory card, or 

saved information can be loaded to the transceiver.
1.  Press and hold the [

DISP

] key, and then touch [

SD CARD

].

2.  Rotate the 

DIAL

, then touch [

2 MEMORY CH

].

3.  Rotate the 

DIAL

 knob to select the operation to be performed.

Write to SD

Saves the memory channel information saved on the transceiver 

onto a microSD memory card.

Read from SD

Loads the information to the transceiver from the microSD mem-

ory card.

4.  Press the [

DISP

] key.

A pop-up window appears on the LCD.

5.  Touch [

OK

] twice.

6.   When  [

Write to SD

] is selected and data writing completes, a beep sounds and 

“COMPLETED” appears on the LCD.

7.   When  [

Read from SD

] is selected and data reading completes, a beep sounds, 

then the transceiver restarts with the settings read from the microSD memory card 
applied.

Summary of Contents for FT3DR



































































































Reviews: