40
Preset VHF Weather Broadcast Receiver Memory Channels
The frequencies (10 channels) used for the VHF Weather Broadcast Stations are regis-
tered in dedicated preset receiver memory channels.
1. Press the [
A/B
] key to set the A-band as the operating band.
2. Touch [
F MW
], and then touch [
P.RCVR
].
If [
P.RCVR
] is not displayed, touch [
BACK ←
] to display [
P.RCVR
] and touch it.
3. Press the [
BAND
] key to select [
WX CH
].
4. Rotate the
DIAL
knob to select the desired channel.
• For the available Weather Broadcast channels, see the following table.
• To stop receiving the WX Channel Frequency, press the [
BACK
] key or touch
[
F MW
] followed by [
P.RCVR
].
WX Channel Frequency List
Memory channel No.
Frequency (MHz)
Memory channel No.
Frequency (MHz)
1
162.550
6
162.500
2
162.400
7
162.525
3
162.475
8
161.650
4
162.425
9
161.775
5
162.450
10
163.275
In the event of extreme weather disturbances, such as storms and hurricanes, the
NOAA (National Oceanic and Atmospheric Administration) sends a weather alert accom-
panied by a 1050 Hz tone and subsequent weather report on one of the NOAA weather
channels. You may enable the Weather Alert tone via Set Mode option [SIGNALING] →
[14 WX ALERT], if desired (See page 74).
