22
Connecting to a Faraway Station Using WIRES-X
Connecting to analog nodes
When the node you want to connect to is an analog station, use the DTMF function on
the transceiver. For details on how to use the DTMF function, refer to “Using the DTMF
Function” in the basic operating manual.
Connecting to nodes or rooms on the Internet
1
Set the main band frequency to the local node frequency.
2
Touch
[MODE]
to switch to analog FM mode.
Tip
For details, refer to “Selecting the communication mode” in the basic operating manual.
3
While pressing
,
touch
[DTMF]
displayed on the
screen.
Displays the numeric keypad.
4
Touch the DTMF ID key of the room or node you connect
to.
Transmits the DTMF code.
5
Release , and keep the transceiver in reception mode for about 10 seconds.
Once connection is established, you will be able to hear audio.
Caution
The connection destination screen does not appear.
Tip
You can store DTMF codes consisting of up to 16 digits for 10 channels on the transceiver. If you
register the codes of frequently-used connection destinations in advance, you can easily transmit
a code by pressing its abbreviated number while pressing
.
For details, refer to “Using the DTMF
Function” in the basic operating manual.
