18
Before Using the
Transceiver
Names and Functions of Controls
y
BACKTRACK Screen
Pressing the
key displays the BACKTRACK screen.
• The compass setting is displayed to the upper left of the
compass icon. “H-UP” indicates the vehicle direction
of travel is shown at the top of the compass. “N-UP” is
shown when the compass is set to always indicate North
at the top. To change the compass setting, enter Set
mode, then select
[DISPLAY]
→
[2 HEADING UP]
.
• Upon retrieval of the registered position information, the
distance from the current position is displayed the upper
right of the compass icon.
• Touching
[YR]
displays the position of the received
station on the compass icon (only when the received
signal carries the position information).
• Touching
[MY]
displays your station’s heading direction
on the compass icon.
• Touching
[MEM]
switches to the registration mode to
record.
• Touching
[
★
]
displays the position information registered
with the “
★
” tag. Touching “
★
” while flashing, stores the
position information displayed on the compass icon in the
memory with a “
★
” tag.
• Touching
[L1]
displays the position information registered
with the “L1” tag. Touching [L1] while flashing, the
position information displayed on the compass icon is
stored in the memory with an “L1” tag.
• Touching
[L2]
displays the position information registered
with the “L2” tag. When touching
[L2]
while flashing,
stores the position information displayed on the compass
icon in the stored in the memory with an “L2” tag.
