Yaesu FT-991A, Instruction Manual

Page: 6 / 15

FT-99 1 I
nsTrucTIon
M
anual
(WIrEs-X E
dITIon
) Page 6
C
onneCTing To a
Wires-X
node in The
C4fm
mode
(*r
eCommended
)
n
oTe
:
* Ascertain the DSQ code or the DG-ID setting of the WIRES-X node station. Connecting to the WIRES-X node
requires the transceiver DG-ID be set according to the DSQ code or the DG-ID code set on the WIRES-X node
station.
* Before using WIRES-X, set the communication mode (modulation mode) to C4FM.
1. Press the
MENU(SETUP) button.
2. Rotate the MULTI knob to select “153 WIRES DG-
ID”.
3. Touch [SELECT] on the screen.
4. Rotate the MULTI knob to set the WIRES-X DG-ID
to the same ID number as the node station.
01 - 99: May connect to the node station whose DG-
ID matches.
AUTO: May connect to the node station available
in your area.
Default setting: AUTO
5. Touch
[ENTER]
on the screen.
6. Touch [BACK] .
Returns to the original screen.
MULTI knob
MENU(SETUP) button MODE button
7. Set the communication mode to C4FM.
After pressing the MODE button, touch “ C4FM ”.
8. Tune to the frequency of the local node you want to connect to.
9. Transmit corresponding to the transmit/receive frequency.
• If receiving the signal from the node, transmit it as is.
• If not receiving the signal from the node, it is possible that the node
station is not connected to the Internet
à
proceed to step 10.
10. Press the F(M-LIST) button.
11. Touch [ ] .
The transceiver automatically switches to transmit mode and “ ” of
the “ ” icon flashes.
When a local node is found, “ ” is lit solid, and the node name (call
sign) and city name appear.
T
ips
:
• While “ ” is flashing, briefly press [ ] to re-establish connection
to the local node.
• While “ ” is flashing, press and hold [ ] for over one second to
cancel the connection operation.
• When a local node cannot be found, “ ” will disappear in 20
seconds.
• When the local node found is a repeater station, “ ” appears on
the right side of “ [R] ”.
DSCNCT
J 1 BF Q Y ND - S I AG H N WA KU - A
c
oMMunIcaTIng
u
sIng
WIrEs-X