19
CW Mode Operation
FT-891 Advance Manual
Text Message Programming with the Optional FH-2
1. Set the operating mode to CW.
2. Press the [
MEM
] key on the FH-2. A blinking
“REC” icon will appear in the display.
3. Press any of the FH-2 keys numbered [
1
]
through [
5
], to select the desired CW Mem-
ory Register that you wish to program with
text.
4. Press the [
MEM
] key on the FH-2. The text
input screen will appear.
5. Rotate the
MULTI
function knob to select
the letters, numbers, or symbols of the de-
sired label, then press the
MULTI
function
knob.
6. Press the
MULTI
function knob.
7. Repeat step 5 and 6 to program the remaining letters, numbers, or symbols of the
desired text. Up to 50 characters may be stored in each of the five memories.
r
Rotate the
MULTI
function knob to set the cursor position and press the [
B
](
CE
)
key to erase and input characters.
8. When the message is complete, add the “}” character at the end to signify the termi-
nation of the message.
9. When the text entry is complete, press the [
B
](
ENT
) key.
10. Press and hold the FH-2 [
MEM
] key for one second to exit the text input screen and
resume normal operation.
