83
Menu Mode
FT-891 Advance Manual
07-05 CW OUT LEVEL
Function:
Sets the level of the CW signal output from the RTTY/DATA jack.
Available Values:
0 - 100
Default:
50
07-06 CW AUTO MODE
Function:
Enables/disables CW keying while operating on SSB.
Available Values:
OFF/50M/ON
Default:
OFF
Description: OFF:
Disables CW keying while operating on SSB.
50M:
Enables CW keying while operating SSB on 50 MHz (but not HF).
ON:
Enables CW keying while operating SSB on all TX bands.
07-07 CW BFO
Function:
Sets the CW carrier oscillator injection side for the CW mode.
Available Values:
USB/LSB/AUTO
Default:
USB
Description: USB:
Injects the CW carrier oscillator on the USB side.
LSB:
Injects the CW carrier oscillator on the LSB side.
AUTO:
Injects the CW carrier oscillator on the LSB side while operating on
the 7 MHz band and below, and the USB side while operating on
the 10 MHz band and up.
07-08 CW BK-IN TYPE
Function:
Sets the CW brake-in function.
Available Values:
SEMI/FULL
Default:
SEMI
Description:
Selects the CW brake-in function.
SEMI:
A brief delay is provided after the CW keying operation, before the
transceiver returns to receive mode.
The receiver recovery time may be changed using Menu Mode “
07-
09
[
CW BK-IN DELAY
]”.
FULL:
The transceiver immediately returns to receive mode after every
CW key-up (QSK mode).
07-09 CW BK-IN DELAY
Function:
Sets the CW delay time.
Available Values:
30 - 3000 (msec)
Default:
200msec
Description:
In semi break-in mode, this setting determines the delay time before
returning to receive mode after the CW keying operation.
The delay time can be changed in 10 msec steps between 30 msec and
3000 msec.