2003.0510NA(U/E)
Printed in Japan
B9200432
VERTEX STANDARD CO., LTD.
For the latest Yaesu news,visit us on the Internet:
4-8-8 Nakameguro, Meguro-ku, Tokyo 153-8644, Japan
VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
International Division
8350 N.W. 52nd Terrace, Suite 201, Miami, FL 33166, U.S.A.
YAESU EUROPE B.V.
P.O. Box 75525, 1118 ZN Schiphol, The Netherlands
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20 /F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
http://www.vxstd.com
http://www.vxstdusa.com
Email: [email protected]
http://www.yaesu.co.uk
Email: [email protected]
Phone 714/827-7600; Fax 714/827-8100
http://www.vxstd.com.hk
About this brochure: we have made this brochure as comprehensive and factual as possible. We reserve the right, however, to make changes at any time in equipment, optional accessories, specifications,
model numbers, and availability. Precise frequency range may be different in some countries. Some accessories shown herein may not be available in some countries. Some information may have been
updated since the time of printing; please check with your Authorized Yaesu Dealer for complete details.
FT-8800 Series
MH-42
B6JS
Hand Microphone
YSK-8900
Separation Kit
MEK-2
Microphone Extension Kit
(for use with Yaesu 8-pin Microphones)
CT-39A
Packet Interface Cable
MLS-100
High-Power
External Speaker
FP-1030A
AC Power Supply (30 A)
FP-1023
(U.S.A. only)
AC Power Supply (25 A)
MMB-60
Quick Release Mobile
Mounting Bracket
SPECIFICATIONS
General
Frequency Range: RX:108.000 - 520 MHz,
(USA Version) 700 - 999.995 MHz (Cellular Blocked)
TX: 144.000 - 146.000 MHz (or 144.000 - 148.000 MHz),
430.000 - 440.000 MHz (or 430.00 - 450.000 MHz)
Frequency Steps: 5/10/12.5/15/20/25/50 kHz
Operating Modes: F3, F2, F1
Antenna Impedance: 50
Ω
, unbalanced (Antenna Duplexer built-in)
Frequency Stability:
±
5 ppm @ 14
°
F ~ +140
°
F (
–
10
°
C ~ +60
°
C)
Operating Temperature Range:
–
4
°
F ~ +140
°
F (
–
20
°
C ~ +60
°
C)
Supply Voltage: 13.8 VDC (
±
15%), negative ground
Current Consumption (Approx.): RX: 0.5 A (Squelched)
TX: 8.0 A (430 MHz), 8.5 A (144 MHz)
Case Size (W x H x D): 5.5" x 1.6" x 6.6" (140 x 41.5 x 168 mm)
(w/o knobs & connectors)
Weight (Approx.): 2.2 lb (1 kg)
Transmitter
Power Output: 50/20/10/5 W (144 MHz),
35/20/10/5 W (430 MHz)
Modulation Type: Variable Reactance
Maximum Deviation:
±
5 kHz
Spurious Radiation: Better than
–
60 dB
Modulation Distortion: Less than 3%
Microphone Impedance: 2 k
Ω
DATA Jack Impedance: 10 k
Ω
Receiver
Circuit Type: Double-conversion superheterodyne
Intermediate Frequencies: 45.05 MHz/450 kHz (Left band),
47.25 MHz/450 kHz (Right band)
Sensitivity (for 12dB SINAD): Better than 0.2
µ
V
Squelch Sensitivity: Better than 0.16
µ
V
Selectivity (
–
6dB/
–
60dB): 12 kHz/30 kHz
Maximum AF Output: 2 W @ 8
Ω
for 5% THD
AF Output Impedance: 4-16
Ω
Specifications are subject to change without notice, and are guaranteed within
the 144, and 430 MHz amateur bands only. Frequency ranges will vary
according to transceiver version; check with your dealer.
OPTIONS
144/430 MHz FM DUAL BAND TRANSCEIVER
HIGH PERFORMANCE
HIGH MID1 MID2 LOW
50W/35W(430MHz) 20W 10W 5W
The FT-8800 series provides extended receiver coverage
beyond the Amateur bands, so you can keep informed of
communications activities in the public safety, commercial,
aircraft, and government communications ranges.
The FT-8800 series operates as two radios in one, with
either 144 MHz or 430 MHz as the "Main" TX/RX band,
with simultaneous monitoring of the other band. Each band
has its own Volume and Squelch
controls, and you can configure
your FT-8800 series for VHF-VHF
or UHF-UHF operation, too!
To get your message through when it counts, the FT-8800
series puts out a full 50 Watts of power on the 144 MHz
band, and 35 Watts on 430 MHz. A thermal sensor
monitors heat sink temperature, engaging the rear
panel’s cooling fan only when needed.
WIDE FREQUENCY COVERAGE
INDEPENDENT TWO-CHANNEL OPERATION
HIGH POWER OUTPUT
The FT-8800 series provides a wide variety of memory
resources, including 512 "regular" memories each
bands, Five "Home" channels for favorite frequencies,
Ten sets of band-edge memories each bands, and six
"Hyper Memories"
which store complete
sets of transceiver
operating status.
To save valuable time when operating a transceiver with
the capability of the FT-8800 series, the "Hyper Memory"
feature allows you to store a complete set of configuration
data for the two bands on which you’re operating. Hyper
Memory will store not only frequency and tone data, but
also Automatic Repeater
Shift status, Packet
parameters, Scanning
mode, and VFO tracking
configuration.
OVER 1000 MEMORY CHANNELS
ONE-TOUCH BAND-PATTERN "HYPER MEMORY" FEATURE
For emergency work, or to extend the range of a hand-
held unit, the FT-8800 series includes Cross-Band
Repeat capability, similar to that pioneered on our
popular FT-8100 series Dual Band FM Mobile!
With the FT-8800 series and its optional YSK-8900 Separation
Kit, mounting your radio is a breeze even in the tightest
locations. The YSK-8900 includes a 20-foot (6 m) remote
cable and mounting bracket for the front panel.
The Smart Search
™
feature may be used to load
–
automatically
with no operator intervention
–
a special memory bank of
up to 25 memory channels per band on which activity is
detected. Smart Search
™
will sweep the band, looking
for channels on which activity may be found, and will
load busy channels into special "soft" memories.
For operating on FM satellites like UO-14, the versatile
memory system of the FT-8800 series allows you to store
a set of uplink and downlink frequencies that account for
Doppler shift over the entire horizon-to-horizon pass,
allowing you to select the optimum uplink/downlink
combination effortlessly.
Providing excellent performance even under difficult link
conditions, Yaesu’s 50-tone sub-audible CTCSS and 104-tone
DCS signaling systems ensure that you have full access to
repeater and remote-base inputs, and the built-in CTCSS/DCS
decoders allow silent listening on busy channels. Plus you get
Tone Search Scanning, which will scan for the tone being
received on an incoming signal, allowing you to match tones
quickly when operating on a new repeater system.
Included in the FT-8800 series is Yaesu’s exclusive
ARTS
™
feature which provides a "hand-shake" with
other ARTS
™
-equipped stations during emergency
work. If an "out-of-range" conditions exists with, for
example, a low-power hand-held unit, ARTS
™
will alert
the FT-8800 series user so the hand-held’s operator can
be advised to move to a better location.
Affording easy viewing from a wide variety of viewing
angles, the LCD of the FT-8800 series features Yaesu’s
renowned Omni-Glow
™
display illumination, with four
illuminations levels available for different operating
environments.
The FT-8800 series lets you scan the memories, the entire
operating band, or a portion of the band. The transceiver
will stop on signals encountered during the scan,
resuming the scan after a time delay or after the carrier
drops out. During band scanning, you may configure the
FT-8800 series to remain within the current band, or hop
to the other band, once the band edge is reached. Dual-
frequency "Priority Channel" operation is also provided.
And the Programmable Memory Scan feature allows you
to set up sub-band limits, so you won’t waste time
scanning or tuning in the SSB/CW portions of the bands.
LARGE, EASY-TO-READ LIQUID CRYSTAL DISPLAY (LCD)
CROSS-BAND REPEAT CAPABILITY
Four programmable keys on the microphone allow you
one-touch access to your favorite command functions.
The commands available from the microphone replicate
the corresponding front panel key functions, and include
Band Change, VFO/Memory switching, Home Channel
access, 1 MHz frequency steps, Power Output selection,
Repeater Reverse, and CTCSS/DCS setup.
USER-PROGRAMMABLE MICROPHONE KEYS
CONVENIENT REMOTE-HEAD MOUNTING CAPABILITY
VERSATILE SCANNING CAPABILITY
SMART SEARCH
™
AUTOMATIC MEMORY LOADING
EASY SETUP FOR FM SATELLITE OPERATION
ARTS
™
(AUTO-RANGE TRANSPONDER SYSTEM)
50-TONE CTCSS/104-TONE DCS
(DIGITAL CODE SQUELCH) TONE SYSTEMS
AND MUCH, MUCH MORE!
•
Convenient Access to WiRES
™
and Other Internet-Linking
Systems
•
1200/9600 BPS Packet Capability: Connect your
TNC using the optional CT-39A Packet Cable
•
Automatic
Repeater Shift: Automatically sets the repeater shift
within the designated repeater sub-bands
•
RF Squelch:
Opens the squelch at a user-defined S-Meter level
•
Automatic Power-Off (APO): Turns radio off after long
periods of inactivity
•
Time-Out Timer (TOT): Prevents
"Stuck Microphone" from causing lengthy QRM to others
•
Battery Voltage Meter: Lets you know if your battery is
getting low
•
DTMF Auto-Dial Memory: 16 Memories of
up to 16 tones each
•
Lock Feature for Front Panel
Keys & PTT Switch: Prevents accidental transmission or
frequency change
•
Built-in Duplexer
Ext. Sp.
MLS-100
Main Xcvr Body (e.g. under seat)
MEK-2
Sub-MIC
MIC
FT-8800
series
Remote Head
ANT
DC Input
(for use with Yaesu
8-pin Microphones)
