Pagina 2
KB2LJJ Radio Mods Database and Manuals
03/05/2008 08.24.31
http://www.kb2ljj.com/data/yaesu/ft-817.htm
There is no need to cut the green wire to get the alkaline pack to charge. Split the white connector and
then on the pack connector carefully lift the white plastic tongue that stops the green wire pulling out of
the connector. It will then pull out. This way you can push it back later and no one will ever know!
Extended TX for FT-817
1.
Remove the front panel
2.
Look down on the back of front panel, with the VFO knob just left of center. Look at the jumper
locations just above the VFO knob on the circuit board. Solder the first four jumpers and remove
the solder at location five.
3.
Reassemble the radio, and reset the cpu by pressing the HOME and the power button.
This will extend the xmit freqs. on HF,VHF and UHF
Another mod.