Yaesu FT-710, Manual

Page: 3 / 75

FT-710 Technical Supplement
SPESIFICATIONS -2
Specifications
Receiver
Circuit Type
: Direct Sampling Superheterodyne
Intermediate Frequencies
: SSB, CW: 18kHz/AM, FM: 24kHz
Sensitivity
: SSB, CW (BW: 2.4kHz, 10dB S+N/N)
1.8MHz - 30MHz 0.16µV (IPO: AMP2)
50MHz - 54MH z 0.125µV (
IPO: AMP2
)
70MHz - 70.5MHz 0.16µV (
IPO: AMP2
)
AM (BW: 6kHz, 10d B S+N/N, 30 % modulation @400Hz)
0.5MHz - 1.8MHz 6.3µV
1.8MHz - 30MHz 2µV (
IPO: AMP2
)
50MHz - 54MH z 1µV (
IPO: AMP2
)
70MHz - 70.5MHz 2µV (
IPO: AMP2
)
FM (BW: 12kHz, 12dB SINAD,
3.5kHz
DEV @1kHz)
28 - 30MHz 0.25µV (
IPO: AMP2
)
50MHz - 54MHz 0.2 µV (
IPO: AMP2
)
70MHz - 70.5MHz 0.25µV (
IPO: AMP2
)
Selectivity
(typ): Mode –6dB –60dB
CW (BW: 0.5kHz) 0.5kHz or better 750Hz or less
SSB (BW: 2.4kHz) 2.4kHz or better 3.6kHz or less
AM
(BW: 6kHz) 6kHz or better 15kHz or less
FM (BW: 12kHz) 12kHz or better 25kHz or less
Image Rejection
: 70dB or better (1.8MHz - 28MHz Amateur bands)
60dB or better (50MHz Amateur band)
Maximum Audio Output
: 2.5 W into 4Ohms with 10% THD
Audio Output Impedance
: 4 to 16Ohms (4Ohms: nominal)
Conducted Radiation
: Less than 4nW
Specifications are subject to change, in the interest of technical improvement, without notice or obligation,
and are guaranteed only within the amateur bands.