![background image](http://html2.mh-extra.com/html/yaesu/ft-65r/ft-65r_operating-manual_3131047017.webp)
Installation of Accessories
Antenna Installation
The supplied antenna provides good results over the entire frequency range
of the transceiver. However, for enhanced reception on certain non-Amateur
frequencies, you may wish to connect an an-
tenna designed specifically for that frequency
range, as the supplied antenna is necessarily
a compromise outside the Amateur bands,
and cannot be expected to provide high per-
formance at all frequencies.
To install the supplied antenna, hold the bot-
tom end of the antenna, then screw it onto the
mating connector on the transceiver until it is
snug. Do not over-tighten by using of extreme
force.
• Never transmit without having an antenna connected.
• When installing the supplied antenna, never hold the upper
part of the antenna while screwing it onto the mating con-
nector on the transceiver.
• If using an external antenna for transmission, ensure that the
SWR presented to the transceiver is 1.5:1 or lower, to avoid
excessive feedline loss.
Preparation of SBR-25LI Battery Pack
The
SBR-25LI
is a high-performance Li-Ion battery providing long operating
time in a compact package. Under normal use, the
SBR-25LI
may be used
for approximately 300 charge cycles, after which operating time may be ex-
pected to decrease. When an old battery pack exhibits diminished capacity,
replace the pack with a new one.
Installing the Battery Pack
1. Insert the battery pack into the bat-
tery compartment on the back of the
transceiver(
).
2. Push the battery in until the battery
latch on the lower back side of the
transceiver clicks securely(
).
15
FT-65R/FT-65E Operating Manual