12
The Memory Channel Only Mode
The
FT-4XR/XE
may be set to operated only in the registered memory channels.
1. Press and hold the
MONI/T.CALL
key and the
PTT
switch simultaneously, while turn-
ing the transciever
ON
.
2. Press the [▲] or [▼] key to select the “
F5 M-ONLY
”.
3. Press the Function key.
•
The memory channel only mode is ON, the previously selected memory channel is
recalled.
•
Pressing the [▲] or [▼] key may be selected the memory channel.
•
Inputting the 3 digits of the memory channel using the numeric keys may be re-
called the memory channel directly.
z
In the memory only mode, the following functions will not operate:
• Changing the VFO mode (Press the [
V/M
] key)
• Memory Tune (Press the [
#BAND
] key)
• Program Memory scan (Press the Function key, and then press the [
#BAND
] key)
• Recalling the Home channel
• Reverse function (Press the Function key, and then press [
P2
] key)
• DTMF autodialer setting
z
In the memory only mode, press the Function key to change the squelch level.
z
In the memory only mode, press and hold the Function key to change the transmit output level.
Canceling Memory Only Mode
1. Turn the transceiver
OFF
, and then press and hold the
MONI/T.CALL
key and the
PTT
switch simultaneously to, while turning the transceiver ON again. The memory
channel only mode OFF.
