Yaesu FT-2980R, Operating Manual

Page: 70 / 80

17 DT A/M
Function : Enables/Disables the DTMF Autodialer feature.
Available Values : MANUAL / AUTO
Default : MANUAL
18 DT DLY
Function : Setting of the DTMF Autodialer’s TX Delay Time.
Available Values
: 50 / 250 / 450 / 750 / 1000 ms
Default : 450 ms
19 DT SET
Function : Loading of the DTMF Autodialer Memories.
See page 28 for details.
20 DT SPD
Function : Setting of the DTMF Autodialer Sending Speed.
Available Values
: 50 (high speed) / 100 (low speed) ms
Default : 50 ms
21 EDG.BEP
Function : Enables/Disable the Band-edge beeper while scanning.
Available Values : ON / OFF
Default : OFF
22 INT CD
Function
: Selects the Access Numbers (DTMF digits) for WIRES™ Internet linking.
Available Values : DTMF 0 - DTMF 9 / DTMF A - DTMF F
Default
: DTMF 1
23 INT MD
Function : Selects the Internet Link Connection mode.
Available Values : SRG / FRG
Default : SRG
24 INT.A/M
Function : Enables/Disables DTMF Autodialer feature while using the Internet Connec-
tion feature.
Available Values : MANUAL / AUTO
Default
: MANUAL
25 INT.SET
Function : Selects the memory register for an Access Number (DTMF code) for non-
WiRES Internet Link System access.
Available Values : F0 - F9
Default : F1
26 LOCK
Function
: Selects the Control Locking Lockout combination.
Available Values : KEY / DIAL / K+D / PTT / K+P / D+P / ALL
Default
: OFF
Note : “K” = “Key;” “D” = “Dial;” and “P” = “PTT”.
66
“Set” (Menu) Mode
FT-2980R Operating Manual