WARNING
Do not power this transceiver
with a voltage other than the
specified power supply volt-
age.
A fire, electric shock, or damage
may result.
Do not use the battery pack for
any model other than the spec-
ified transceiver.
A fire, leak, overheating, explo-
sion, or ignition can result.
Do not make very long trans-
missions.
The main body of the transceiver
may overheat, resulting in a fail-
ure or burns.
Do not disassemble or make
any alteration
to this product.
An injury, electric shock, or failure
can result.
Keep the terminals of the bat-
tery pack clean.
If terminal contacts are dirty or
corroded, a fire, leak, overheat-
ing, explosion, or ignition can
result.
Do not handle the battery pack
or charger with wet hands. Do
not insert or remove the power
plug with wet hands.
An injury, leak, fire, or failure can
result.
If smoke or strange odor is emit-
ted from the main body, battery
pack, or battery charger, imme-
diately turn the transceiver off;
remove the battery pack, and
remove the power plug from the
outlet.
A fire, leak, overheating, damage,
ignition, or failure can result. Con-
tact the dealer from which you
purchased this product or Yaesu
Amateur Customer Support.
Do not use the battery pack
which is externally damaged or
deformed.
A fire, leak, heating, explosion, or
ignition can result.
Do not use any battery charger
which is not specified by Yaesu.
A fire or failure can result.
When transmitting, keep the
transceiver at least 5.0 mm (3/16
inch) away from your body.
Use only the supplied antenna.
Do not use modified or damaged
antennas.
If charging of the battery pack
cannot be completed within the
specified charging time, imme-
diately remove the power plug
of the battery charger from the
outlet.
A fire, leak, overheating, explosion,
or ignition can result.
7
Safety Precautions
FT-25R/FT-25E Operating Manual
Application for FCC / IC
FCC ID: K6620663X20, IC: 511B-20663X20
