background image

SCU-58/SCU-40 USB Driver Software Installation

Do not connect the transceiver to the computer via the SCU-56/SCU-20 PC Connection Ca-

ble until the driver installation process has been completed. Connecting the SCU-56/SCU-20 

to the computer before installation has been completed may result in the wrong driver being 

installed, preventing proper operation.

This procedure is not necessary when exchanging data using a micro SD card.

Before using the SCU-56/SCU-20 PC connection cable, installation of the driver software for the SCU-

58/SCU-40 is required. Download the driver software for the SCU-58/SCU-40 in advance.

Download the designated driver software from the Yaesu website (http://www.yaesu.com/). Read the in-

stallation manual thoroughly and install the driver. The SCU-56/SCU-20 is included in the optional SCU-

58/SCU-40 WIRES X Connection Cable Kit.

Connect the FTM-200DR/DE and the PC

This procedure is not necessary when exchanging data using a micro SD card.

1. 

Refer to the figure and connect the SCU-56 or SCU-20 PC connection cable.

When using the CT-163 cable, connect the D-SUB connector to the COM port of the PC.

USB

DATA

SCU-56/SCU-20

(Included in the optional SCU-58/SCU-40)

7

Summary of Contents for ADMS-15


































Reviews: