background image

•  Save as

Click the [

Save As

] parameter in the “File” menu.

Specify the file name and destination folder for the selected configuration file and then click the [

Save

button to save the file.

This menu item is grayed out and cannot be operated until the information is read from the 

FTM-200D into the ADMS-15 PC programmer. See “Be sure to read the transceiver informa-

tion data before using ADMS-15” (Page 8) for more information.

•  Import

ADMS-15 data files may be created using a spreadsheet such as Microsoft Excel.

To create a data file for the import of data, save the spreadsheet in the “CSV” comma separated file format.

A spreadsheet may be easily created by exporting the template data in the “CSV” format using the 

ADMS-15 “Export” command. After the “CSV” data has been edited the spreadsheet may be imported 

back into the ADMS-15 PC programmer.

A separate import file is needed for each template.

For example, to import the VFO and memory templates; first, click the “VFO” tab to display the VFO tem

-

plate, then import the VFO (CSV) file; next, click the “Memories” tab to display the “Memory” template; 

then import the Memory (CSV) file.

Do not edit the “Check” line at the right side end of the completed CSV file.

•  Export

To export the data file in the “CSV” (Comma Separated Values) format.

Click the [

Export

] parameter in the “File” menu, On the “Save as” screen displayed, specify the directory 

and file name and save the file.

Type a file name in the bottom box, then click the [

OK

] button.

•  Import with FTM-100D/400D format

To create a data file for the import of data, save the spreadsheet in the “CSV” comma separated file format 

(FTM-400XD/D or FTM-100D).

A spreadsheet may be easily created by exporting the template data in the “CSV” format using the ADMS-7 

or ADMS-9 “Export” command.

A separate import file is needed for each template. For example, to import the VFO and memory templates; 

first, click the [

VFO

] tab to display the VFO template, then import the VFO (CSV) file; next, click the 

[

Memories

] tab to display the “Memory” template; then import the Memory (CSV) file.

•  Export with FTM-100D/400D format

To export the data file in the “CSV” (Comma Separated Values) format for the ADMS-7 or ADMS-9.

Click the [

Export with FTM-100D/400D format

] parameter in the “File” menu, On the “Save as” screen 

displayed, specify the directory and file name and save the file.

Type a file name in the bottom box, then click the [

OK

] button.

15

Summary of Contents for ADMS-15


































Reviews: