background image

Storage Method

Troubleshooting List

Malfunction Description

No output when switched on

Motor failure when turning the 
twist grip after switched on

Battery charge failure

1.Dead battery

2.Batery not connected

1.Battery voltage is low

2.The power off switch is enabled 

     when pulling the brake lever

3.The Parking Mode has not been 

     turned off yet 

1.Not properly connected

2.Battery temperature is 

    too high or too low

1.Check whether the plug 

   is loosened.

2.Wait for it to achieve normal 

    temperature

1.Charge the battery.

2.Do not pull the brake lever when 

    twisting the twist grip.

3.Check “Start the Scooter” 

    section. Check if the side 

    stand is on.

1.Charge the battery.
2.Check if it's properly connected
3.Replace Alarm

Causes

Troubleshooting

Short-time Storage:

1. Keep the scooter in flat, steady, well-ventilated and dry area.

2.Charge the battery to 50% full before storage to maximize battery life. 
3.Avoid exposure under sunlight and rain to reduce damage or aging.

Long-time Storage:

1. Remember to have a cycle of charge and a discharge at least every 2 months and charge the battery to 50% 
    full before storage to maximize battery life.
2.Charge the battery to 100% full after long-term storage.
3.Check all the parts carefully to make sure that there is no problem before riding it. If there's any problem, 
    take the scooter to your dealer for maintenance or repair. 

Warning: 

Please take out the battery from the scooter when long-term storage.

 

28

29

Summary of Contents for Z3





















Reviews: