Yadea M6L, Service Menu

Page: 7 / 66

1
A Few Words About Safety
Service Information:
The service and repair information contained in this manual is intended for use by qualified, professional technicians.
Attempting service or repairs without the proper training, tools, and equipment could cause injury to you or others. It could also
damage the vehicle or create an unsafe condition.
This manual describes the proper methods and procedures for performing service, maintenance and repairs. Some procedures
require the use of specially designed tools and dedicated equipment. Any person who intends to use a replacement part, service
procedure or a tool that is not recommended by Yadea, must determine the risks to their personal safety and the safe operation
of the vehicle.
If you need to replace a part, use Yadea genuine parts with the correct part code or an equivalent part. We strongly recommend
that you do not use replacement parts of inferior quality.
For the Owner's Safety:
Proper service and maintenance are essential to the customer’s safety and the reliability of the vehicle. Any error or oversight
while servicing a vehicle can result in faulty operation, damage to the vehicle, or injury to others.
• Improper service or repairs can create an unsafe condition that can cause your customer to be seriously
hurt or killed.
• Follow the procedures and precautions in this manual and other service materials carefully.
For Your Safety:
Because this manual is intended for the professional service technician, we do not provide warnings about many basic shop
safety practices (e.g., Hot parts–wear gloves). If you have not received shop safety training or do not feel confident about your
knowledge of safe servicing practice, we recommended that you do not attempt to perform the procedures described in this
manual.
Some of the most important general service safety precautions are given below. However, we cannot warn you of every
conceivable hazard that can arise in performing service and repair procedures. Only you can decide whether or not you should
perform a given task.
• Failure to properly follow instructions and precautions can cause you to be seriously hurt or killed.
• Follow the procedures and precautions in this manual and other service materials carefully.
For Handling This Vehicle:
• Be sure to turn the main switch OFF and remove the battery before checking or servicing of parts removal/
installation.
• To prevent electric shock, always wear safety protective gears and use insulation tools when checking or
servicing of parts removal/installation.
• Do not work with wearing any metal items.
• Do not work in places where the floor is wet or raindrops fall on.
• When the electrolyte from the battery gets in eyes or on skin, there is a danger of blindness or damage,
so work with precaution. If electrolyte gets in your eyes or on your skin, immediately wash the area with
plenty of water and get medical examination by a specialist.
Avoid using a high-pressure water machine as washing vehicle with high water pressure may cause malfunction of moving parts
or electric parts.
Important Safety Precautions:
Follow the instructions below when checking and servicing the high voltage system.
In this manual, the power supply circuit above DC 48 V series is referred to as high voltage system. Do not touch the wires and
related parts carelessly.
When performing the vehicle maintenance, be sure to wear safety protective gears and use insulation tools. Always check the
safety protective gears and insulation tools for damage before using.
Ensure the safety of others by indicating that the high voltage works is being done on the vehicle when performing work relating
to the high voltage.
Make sure you have a clear understanding of all basic shop safety practices and that you are wearing appropriate clothing and
using safety equipment. When performing any service task, be especially careful of the following:
Read all of the instructions before you begin, and make sure you have the tools, the replacement or repair parts, and the skills
required to perform the tasks safely and completely.
Protect your eyes by using proper safety glasses, goggles or face shields any time you hammer, drill, grind, pry or work around
pressurized air or liquids, and springs or other stored-energy components.
Handling hot or sharp parts can cause severe burns or cuts. So, use other protective wear when necessary, for example gloves
or safety shoes.
If you need to support the vehicle for maintenance, please use jack or special base. Whenever you lift the vehicle, make sure
that the vehicle is always firmly supported.
General Information