B. Pairing/Linking
Pairing Bluetooth
®
enabled mobile phones with the YD-V9
Speakerphone authorizes hands-free communication. This
step only needs to be performed once.
Before Pairing the YD-V9 Speakerphone:
• Ensure the YD-V9 is plugged directly to a 12V power port
• Ensure the YD-V9 is OFF
• Ensure the Bluetooth
®
on your mobile phone is activated
Follow the steps below to pair your YD-V9 with your mobile
phone:
• Press and hold
red
button for 7-8 seconds
• Release the button until the LED indicator alternately blinks
red and blue
NOTE:
YD-V9 is now in pairing mode
• Activate the Bluetooth
®
settings of your mobile phone
NOTE:
The following steps are general procedure; to access
Bluetooth
®
Menu for you mobile phone, please refer to your
phone user manual.
• Select SET-UP or CONNECT from your mobile phone
menu
• Find and select OPTION to discover Bluetooth
®
devices;
establishing a connection may take several minutes
• If found, phone display should indicate
YD-V9
device was
detected or Select “
YD-V9
” from the list
• Phone should give you a prompt asking if you want to pair
the device
• Select OK or ACCEPT and wait for prompt to enter passkey
or PIN
• Enter the code
0000
• Select “OK” to pair and connect the YD-V9 and the
handset
NOTE:
If the YD-V9 and mobile handset did not successfully
pair, follow the steps below to retry pairing:
• Turn the YD-V9 OFF
• Turn OFF all other Bluetooth
®
devices before starting the
pairing process
• Repeat the pairing instructions from the beginning
NOTE:
• After 2 minutes, the YD-V9 will exit paring mode
automatically if it can’t connect with the mobile phone
7
