Package Content
Speakerphone
Installations
IMPORTANT:
Before installing the YD-V9, make sure:
• Vehicle is parked in a safe area
• Car engine is OFF
• Emergency brake is set
1. Plug the YD-V9 directly to your vehicle’s 12V power port.
2. Make sure the speakerphone is directed towards the
user.
NOTE:
• For better performance, make sure
that the speakerphone is not
obstructed
• Use the 12V power port near the user
• The device will connect to the
last paired devices every time it is
powered ON
Operations
IMPORTANT:
Directly plug the YD-V9 to your vehicle’s
12V power port.
NOTE:
The device is not equipped with a built-in battery
therefore will not function if not plugged directly to a 12V
Power Port.
A. Power ON/OFF
To turn the YD-V9 ON:
• Verify that the device is plugged into a 12V power port
• Press and hold
red
button for about 3-5 seconds
• Release until the blue LED flashes
To turn the YD-V9 OFF:
• Press and hold
red
button for about 3-5 seconds
• Release until the LED flash red
NOTE:
Always turn the speakerphone OFF before leaving
the vehicle.
microphone
adjustable speaker
volume control
power indicator
red button
green button
6
