6
a. Charge the Camera
i. For safety, the camera should be fully charged prior to operating.
The first few times we suggest charging the camera for 12 hours.
Normally the camera will fully charge in 3 hours.
ii. Using the USB to 12V charger provided simply plug the USB end into
the camera and the 12V end into any vehicle 12V socket.
iii. Using the Mini USB to USB Cable provided, simply pug the Mini
USB end into the camera and the USB to any powered PC.
iv. If the battery is low on the camera, the battery icon will flash.
b. Memory
i. Insert the Micro SD card by gently pulling off the socket cover on
the camera and place the Micro SD card in the slot and pushing
till it clicks. Then replace the socket cover and push till it is secure.
ii. To remove the Micro SD Card, push once till the card releases
from the port.
iii. Camera will hold up to 32GB Micro SD Card
iv. Camera should be powered down before adding or removing
the Micro SD Card
v. Micro SD Card Recording Capacity Guide
*Capacity guide are based on 720 x 480 resolution recording
4GB
8GB
16GB
32GB
1 hrs 30 min - 2 hrs
3 hrs - 3 hrs 30 mins
6 hrs - 6 hrs 30mins
12 hrs - 12 hrs 30 mins
5. OPERATION
Summary of Contents for Dash Road Cam HD
Page 1: ......
