9
ConneCTing The CaMera To The MoniTor
i. The Yada Digital Tiny Traveler™ is a plug and play system. No software or syncing is needed in order for the
system to operate. Once plugged in and both the Camera and the Monitor are powered on, the Monitor
will automatically show the image of the Camera.
Final aDjusTing anD oPeraTion oF The DigiTal Tiny Traveler™
i. Now that the system is connected, sit in the driver’s seat and turn on your vehicle while remaining in
park.
ii. Turn on the monitor by pressing the POWER button on the top on the Monitor. The image from the
Camera will appear in the Monitor.
iii. You can adjust the angle or the placement of the Camera so that the image of the baby seat is in complete
view on the Monitor.
iv. To Adjust Brightness
1. Press “MENU”
2. Go to “Brightness” by pressing “ – “
3. Press “Blank Button” to enter
4. Press “ + “ or “ – “ to adjust the brightness level
5. Press “Blank Button” to confirm and exit
v. The Camera has infrared Night Vision. When the light becomes dark in the car or it is nighttime, you will
still be able to glance at your baby and see them clearly. The image color will look different due to the
night vision. The 6 red LEDs surrounding the camera lens will illuminate but no light will be shining on
the baby.
Power
Blank Button
Up
Menu
Down
