8
• Use the Suction Cup Mount to attach to the rear window or rear-most side glass that is not a door window.
For safety, we recommend not mounting to the window of the door. Because there is a power cable, this
can become dangerous when opening the rear or side door. Ensure that the Suction Cup is secured tightly
to the window and adjust the Camera to the angle needed.
• To mount the Camera using the Single Pole Headrest Mount, unscrew the tightening pin and move towards
the main mount to separate the two clamps that go around the headrest pole. Place the mount and clamp
around the headrest pole that best suits the camera placement that is needed. Secure the mount to the
pole by pushing the pin back across the clamp and screw tightly. The Camera can then be mounted on the
bracket and adjusted to the desired angle.
This Mount can fit a headrest pole that is 10mm to 30mm in diameter. If needed, please use the additional
foam grip provided.
iii. Powering the Camera:
• The Camera comes with a 12/24v power adapter which can be plugged into any available socket in your
vehicle. The cable is 5 meter/16 feet long. Starting with the power cord at the base of the Camera, run and
tuck the cable to the available socket you wish to plug in to. Ensure that the cable is not in contact with the
baby seat or within reaching distance of the baby. It is recommended to tuck the cable behind the seat,
lining, rug or panels in order to keep it fron tangling or getting caught on any object.
• Once you have the Camera secure in its Mount, and the power cable tucked carefully out of the way, you
can plug in the adapter into your 12/24v socket. Make sure the adapter is pushed all the way into the
socket.
