Yachting Electronic Co. FC60X, User Manual

Page: 8 / 40

Instruction of Freecast sensor Instruction of Freecast sensor
1. Power 1. Power supply supply
The FC60X sensor is provided with a separate, built-in, and
irremovable lithium battery that has a continuous service
time of 550 hours in normal operation. When the battery’s
service life ends and becomes out of service, it should be
handled in a way compliant with local provisions regarding
discarding used batteries and relevant electronic products.
2. 2. Electronic switch Electronic switch
There are three pins on the bottom of cover, which is used
to switch between power on / power off.
At the moment the sensor is put in water, the sonar trans-
mitter/receiver is automatically turned on and transmits
ultrasonic signals. As the principal machine receives the
signals, related information about the sea bottom will be
showed on the screen. After a few seconds elapse since the
sensor is taken out of water, the built-in power will be switch
off automatically and transmission of sonar signals termi-
nated