Handle the sensor by the
antenna post when trying
to draw it out from the water
Use a thread tied to the first
hole, tackled to be rotatable
Use the second hole in the Stationary float Mode,
bind the fishing hook with light threads to the second
hole. Be caution of not over-weight the hook line, thus
will be likely to submerge the sensor, causing the signal
terminate.
Caution
Caution: Using light threads to tie the sensor and the fishing
hook can increase likelihood of break-up. The sensor in
water is supported by natural buoyancy force (which equals
its own weight plus 5.8g lure plus the weight of lead). All
accessories attached to the sensor, including the hook,
fishing thread, and lure etc., can total up to 5.4~5.9g. With
the sensor’s weight of 34g joining, the break-down becomes
very likely.
Summary of Contents for FC60X
Page 40: ...www goyachting cn...
