— 9 —
II. Device Connection and Testing
The Device requires no maintenance. When deciding where to install the Device,
choose a dry mounting location. Avoid places where the Device can be flooded with
water, this can damage it.
The Device is directly connected to the network backbone without a drop cable.
Before
connecting the Device, turn off the bus power supply. Refer to the manufacturer’s
documentation if you have any questions regarding the use of connectors:
•
SeaTalk NG Reference Manual (81300-1) for Raymarine networks
•
Technical Reference for Garmin NMEA 2000 Products (190-00891-00)
for Garmin networks
After connecting the Device, close the lock on the connection to ensure its water
resistance and reliability.
To operate properly, the Device requires a MicroSD card with FAT or FAT32
formatting. If you are not sure what file system your card uses, reformat it on
a personal computer (see IV.).
Carefully place the card into the Device’s slot and carefully push the card inward until
it clicks. Slowly withdraw your finger. To remove the card, push inward until a click
is heard and then withdraw your finger (see drawing at I.).
