Getting Started
Charging your Jump Starter
1. Please use a 5V2A/9V2A/12V1.5A
adapter to charge the product.(charg-
ing cable is included, adapter is not
included)
2. Using a 5V/2A adaptor, it will take
approximately
6
hours to fully charge
the unit. In order to extend the battery
life it is recommended to fully charge
the unit every 3-6 months.
Turn On your Jump Starter
Short press the power switch to boot the system, the battery indicator lights
will turn on. For energy saving, the system will turn to standby mode if there
is no operation within
10 minutes
.
Air Compressor
1. Short press the power switch to turn on the device
2. Short press the R button to turn on the air pressor screen, and change
the pressure unit.
Press (+) or (-) to preset your desired pressure, max air pressure: 150 PSI
3. Stretch the inflation air hose from the back of the unit, and screw the air
hose onto tire valve stem.
4. Turn on the air compressor switch, it will automatically shut off once the
desired pressure is reached.
LED Light
Long press the power switch more than 3 seconds to turn on the light
mode. There are three modes which are illumination, SOS and flash,
simply short press the power switch button to change the lighting modes.
And you can also press the power switch button for more than 3 seconds
to turn off the light mode.
EN
04
