Yaber Y31, Instruction Manual

Page: 13 / 116

SETTING UP PROJECTOR
The projector's normal start up screen is as follows. If the first projec�on screen is not this one,
press the “ ” bu�on on the remote control to select USB source.
Select the Input Source
When the "No Signal" prompt appears, you need to select the input source:
1. Press the “ ” bu�on on the remote control to select the desired signal, then press the OK
bu�on on the remote control.
2. Once the signal is detected, the selected source informa�on will be displayed on the screen
a�er a few seconds.
Menu Se�ng Method
1.Press the “ ” on the remote, then the menu picture will display on screen.
2.Press“ /
”key, the menu will move to “PICTURE”>“SOUND” >“TIME”>“OPTION”.
3.Select the adjust interface,use“ / ” key to choose the wanted item.
4.Press“OK” or “ / ”to adjust the item parameter.
I NPU T SO U RCE
VGA
PC-RCB
HDM11
HDM12
AV
USB1
USB2
OK
EN 01 EN 10