Yaasa Desk Light, Extended Original Extended Original

Page: 14 / 20

14
FUNCTIONS
Changing the table height
Press the arrow buttons on the handset in order to move the table upwards or downwards.
Duty cycle
The table may not be operated for more than 2 minutes continually. If this limit is exceeded,
an 18-minute rest phase is triggered. After this pause, the table can be operated normally.
Excessive use of the table may cause permanent damage to the electronic components and
void the warranty.
Complete Retraction
When the table is 3 cm before the lowest position, it will stop automatically. Pressing the “table
down” button will prompt the table to move to its lowest position at a reduced speed.
The table will move as long as the button is pressed or until the minimum or
maximum height has been reached.
FAQs AND TROUBLESHOOTING
Complete troubleshooting instructions and FAQs are available on www.yaasa.eu.
EN