Y3K XPR16H, Quick Start Manual, Page: 9 / 13

4/8/16DVR Quick Start Guide
7
Motion detection recording: when there is a motion event detected, the camera
will be triggered to record and have an alarm out.
Enter into main menu-alarm configuration-motion configuration (refer to Fig
4-4), enable Detection first;
Fig 4-4 Motion detection interface
Enter Motion detection area (refer to Fig 4-5) to set Sensitivity and Detection
area.
Fig 4-5 motion detection area setup
4.3.4 Alarm Recording
Enter into main menu-Alarm configuration-Sensor alarm (refer to Fig 4-6),
enable Detection first, setup the device type.
Fig 4-6 sensor alarm record
Enter into Trigger configuration, select alarm out and recording cameras and
linked PTZ; set Alarm out hold time and Buzzer hold time. Click OK to save
settings.