Ver. 1.8 April
2016
P 5
da Vinci
Jr.1.0
Note: Please follow these steps and ensure that the guide tube is properly installed before
starting the "LOAD FILAMENT" function. Failure to install the guide tube may disrupt filament feed.
Reminder: If you are not too sure where the feed module tube port is,
you may open the casing of the machine to see the indication label.
Installing the Accessories
Ensure that the guide tube has been tightly
inserted into the port to complete the guide tube
installation process.
Direct the guide tube from the tube movement
area out of the machine and then insert the
other end of the filament tube into the feed
module tube port.
3
4
．
Guide tude
Before installing the guide tube, turn off the
printer and move the extruder to the far left-end
of the X-axis. If not done otherwise, the print
quality will be affected.
After the extruder has been adjusted, insert the guide
tube into the extruder.
2
1
．X axis
