Web Server
XW-111™ Wi-Fi Digital Sensor Users Manual
REMOTE SERVICES
Remote Services Enabled
This option enables or disables remote services. If
Yes
is selected, remote services will be enabled as
soon as the
Submit
button is pressed and the XW-111 will immediately attempt to make a connection
with a custom remote server (power cycle not required). Once a connection is established, the
connection will remain until it is disconnected by the remote server (see
Remote Services Notes
below).
Proper connection with the remote server can be verified by checking the remote server. The default
setting for this field is
No
. If Remote Services is enabled, the default settings will connect to the
ControlByWeb.cloud cloud service. Users will need to supply either a token from their account or upload
SSL certificates. Most users should leave these settings at their default. (See
Remote Services
at the
end of this section for more information.)
If Remote Services Enabled is set to
Yes
, the following settings are shown:
Hostname/IP Address
Specify the name or IP address of the remote services' server here. If the IP address is specified, enter it
in this format aaa.bbb.ccc.ddd. For numbers that are less than 100, preceding zeros should not be
included (for example, enter 80 rather than 080). This field can be up to 40 characters long and has no
default setting.
Remote Services Port
Enter the TCP port used for the Remote Services server. This can be set within the range of 0-65535.
The default setting for this field is 8000.
Connection String
This text is sent to the remote services' server when the connection is established. This string should
include any information required by the server at connection. For example, it may include an ID number,
customer number, password, etc. The format is entirely dependent upon the server requirements. This
field can be up to 80 characters long. Default text is provided only as an example placeholder. The
default text is [<
Serial Number
>]:ControlByWeb,XW-111.
Connection Interval
This field specifies the periodic interval in which the XW-111 attempts to connect to the remote server, or
if XW-111 is already connected, it is the interval in which XW-111 sends the connection string. This field
Page 16
Xytronix Research & Design, Inc.
Summary of Contents for CONTROL BY WEB XW-111
Page 1: ......
