1
INTRODUCTION
Thank you for choosing XYTRONIC LF-855D Multi-Function S.M.D. Rework
Station. This unit is the best tool for repairing work, combination with XYTRONIC
LF-3000 and LF-852D which is specially designed for lead free soldering/desoldering,
surface mount devices with temperature controlled hot air. The “2 in 1” design ,save
your working space. Please read the operating manual carefully to maximize the
advantages of using your new LF-855D multi-function SMD rework station and keep
this manual readily accessible for future reference.
【
【
【
【
WARNING
】
】
】
】
and
【
【
【
【
CAUTION
】
】
】
】
:
:
【
ELECTRICAL SHCOK
】
Warning and Caution are positioned at critical points in the manual to draw the
user’s attention to significant safety concerns. Be sure to comply with the
following warnings and cautions for your safety.
This appliance is not intended for use by children or other persons without assistance
or supervision if their physical, sensory or mental capabilities prevent them from
using it safely. Children should be supervised to ensure that they do not play with
appliance. Failure to observe the safety regulation will result in a risk of life and limb.
The manufacturer shall not be liable for damage resulting from misuse of the unit or
unauthorized alterations.
1.
Please unscrew the 4 screws under the bottom enclosure when the unit is
used at the first time.
(See the procedure on page13 )
2. Ensure the voltage rating of the unit and your power supply are identical prior to
use.
3. Check carefully of any damage during transportation.
4. Put the product on a safe and stable working table. Table surface should be
consisted of fire and heat resistant material due to the unit can reach very high
temperature and potentially dangerous.
5. During the operation, the heater is extremely hot, and will cause serious burns if
contacted exposed skin. Use gloves and/or any heat resistant tools to pick up the
PCB assembly to eliminate the possibility of burns.
6. Do not use the product near combustible gases or flammable materials.
7. Turn the power switch OFF and allow the heater to cool before checking or
replacing heater and other parts, or prior to storing the unit.
8. Keep the appliance clean. This may be used with a damp cloth using small
