Xytronic LF-852DII, Operating Manual

Page: 2 / 10

2
INTRODUCTION
This appliance is not intended for use by children or other persons without assistance
or supervision if their physical, sensory or mental capabilities prevent them from
using it safely. Children should be supervised to ensure that they do not play with
appliance. Failure to observe the safety regulation will result in a risk of life and limb.
The manufacturer shall not be liable for damage resulting from misuse of the unit or
unauthorized alterations.
:
【
WARNING
】
and
【
CAUTION
】 :
:
【
ELECTRICAL SHCOK
】
Warning and Caution are positioned at critical points in the manual to
draw the user’s attention to significant safety concerns. Be sure to comply
with the following warnings and cautions for your safety.
1. Ensure the voltage rating of the unit and your power supply are identical prior to
use.
2. Check carefully of any damage during transportation.
3. Put the product on a safe and stable working table. Table surface should be
consisted of fire and heat resistant material due to the unit can reach very high
temperature and potentially dangerous.
4. During the operation, the heater is extremely hot, and will cause serious burns if
contacted exposed skin. Use gloves and/or any heat resistant tools to pick up the
PCB assembly to eliminate the possibility of burns.
5. Do not use the product near combustible gases or flammable materials.
6. Turn the power switch OFF and allow the heater to cool before checking or
replacing heater and other parts, or prior to storing the unit.
7. Keep the appliance clean. This may be used with a damp cloth using small amount
of liquid detergent. Never submerse the unit in liquid or allow any liquid to enter
the station. Never use any solvent to clean the case.
8. This unit is designed for SMD rework and should not be used for any other purpose
without first consulting the manufacturer or its authorized agent.
9. Keep the unit out of the reach of children. Young children should be supervised to
ensure that they do not play with the appliance.
10. Please unscrew the 4 screws under the bottom enclosure when the unit is used
at the first time.(See the procedure on page6 )
To prevent electrical shock, be sure to take the following precautions:
1. Make sure the unit is grounded. Always connect power to a grounded receptacle.
2. Do not pressure the AC power cord. Be sure the work area is well ventilated.
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW
WW
W.100
Y.COM.TW