5
SPECIFICATIONS:
Model
LF-3200
Input
220-240Vac 50Hz 100-120Vac 60Hz
Output
120W
Fuse (Slow type)
T2A
T3. 15A
Temperature Range
200
℃
～
500
℃
Temperature Correction
Range
+99
℃
~-99
℃
Default Set
200
℃
No Password
Temperature correction value“00”
Degrees Centigrade
Figure Dimension
111x158x137mm(W x H x D)
Weight (Unit only)
2.3g
WORKING TEMPERATURE
To meet RoHS requirements, the 60/40 solder alloys are not allowed in the production
process. The lead free solder alloys require a working temperature of 30
℃
higher than
previous generation electrical soldering. The working temperature of solder is detailed
below and can vary from manufacture to manufacture.
Melting point 220
℃
Normal operation 300-360
℃
Production line operation 360-410
℃
When the iron’s working temperature is set within the parameters suitable for the type
of solder being used, a good joint is assured. Too low of a temperature will slow the rate
of solder flow while a high temperature setting might burn the flux in the solder and
emit a heavy, white smoke resulting in a dry joint or permanent damage to the printed
circuit board (P.C.B.) and may also shorten the tip life.
IMPORTANT: The temperature above 410
℃
is not recommended for normal
soldering functions, but can be used for short periods of time when high temperatures
are required. Please note that the lead free solder alloys require a higher soldering
temperature which shortens tip life.
OPERATING INSTRUCTIONS
●
Ensure that the working voltage matches your power supply before beginning use.
●
Check carefully for any damage during transportation.
●
This unit contains:
1. Solder wand.
2. Iron holder with brass tip cleaner.
