1
INTRODUCTION
Thank you for purchasing Xytronic’s high heat capacity soldering station – the best
solution for your soldering equipment needs especially for lead free applications! We
believe that you will be more than satisfied with many features and the versatility of
your new soldering station. Please carefully read the instruction manual prior to
operate to maximize the advantages of using your new soldering station.
WARNING: This appliance is not intended for use by children or other persons
without assistance or supervision if their physical, sensory or mental capabilities
prevent them from using it safely. Children should be supervised to ensure that they
do not play with the appliance. Failure to observe the safety regulation will result in a
risk to life and limb. The manufacturer shall not be liable for damage resulting from
misuse of the unit or unauthorized alterations.
CAUTION:
When power is ON,tip temperatures will be between 200-50
0
00
0℃
℃
℃
℃.To avoid
.To avoid
.To avoid
.To avoid in
in
in
injury
jury
jury
jury
or damage to personnel and items in the work area,
or damage to personnel and items in the work area,
or damage to personnel and items in the work area,
or damage to personnel and items in the work area,read
read
read
read
the
the
the
the below
below
below
below
carefully
carefully
carefully
carefully:
::
:
◆
Do not touch the tip ,heating element or the metal parts near the tip.
◆
Do not allow the tip to come close to ,or touch,flammabe materials.
◆
Inform others in the area that the unit is hot and should not be touched.
◆
Turn the power off when not in use,or left unattended.
◆
Turn the power off when changing parts or storing the LF-3200.
◆
Always place the soldering iron in its original holder when not being used.
◆
For your health, do not inhale solder fumes.
◆
You must not undertake work on live parts. Only the technician is permitted to
undertake repairs. Use the original replacement part only.
NOTE:The station can be set the temperature between 200-500
℃
℃
℃
℃/.With the
/.With the
/.With the
/.With the
high power and great recovery,the station should set in the very high
high power and great recovery,the station should set in the very high
high power and great recovery,the station should set in the very high
high power and great recovery,the station should set in the very high
temperature,we do not
temperature,we do not
temperature,we do not
temperature,we do not
recommend set the temperature over the 500
℃
℃
℃
℃
to
extend the tip’s life.
KEY FEATURES
◆
HEATER/SENSOR FAILED DETECTION: If sensor circuit failed that the
display read “S--E” and cut off the heater power. If heater circuit failed the display
read “H--E” and cut off the heater power.
◆
TEMPERATUE “LOCK-OUT” FEATURE: The temperature can be locked by
“password” code that is convenient for production line management.
◆
HIGH POWER ,GREAT RECOVERY: With the 90W high power, great thermal
recovery improves the soldering environment, It can shorten the soldering
