Xylem YSI ProDSS, User Manual

Page: 18 / 92

16
Operation
System Menu
Push the System key to view and adjust instrument settings. Highlight a sub-menu then push the
ENTER
key to view
the sub-menu options ( Figure 10 ).
Pre-defined or user-selected options are noted within brackets ([]). See “Alpha/numeric entry” on page 14 .
Use the System meu to:
• Set the date and time ( “Date/Time” on page 17 )
• Change the user-defined Good Laboratory Practices (GLP) options
(
“GLP menu” on page 17 )
• Change the instrument language setting ( “Language” on page 19 )
• Change logging options ( “Logging” on page 19 )
• Change sampling options ( “Sampling” on page 20 )
• Set the handheld auto-shutoff time ( “Auto-Shutoff” on page 20 )
• Change the radix point ( Radix Point on page 21 )
• Set the backlight mode ( Backlight on page 21 )
• View the software version ( Software version on page 21 )
• View the handheld serial number ( “Serial #” on page 21 )
• View and adjust the Unit ID ( Unit ID on page 22 )
• View the sensor specific information ( “Sensor info” on page 22 )
• Adjust the display brightness ( “Brightness” on page 22 )
Figure 10 System menu