Slide Flange
4
Slide assembled Flange over the base of the Radar
cone.
4
5,6
Secure Flange
Align Mount
5
Align one mounting hole of the assembled Flange
with the threaded boss in the Radar housing.
Insert M4 Screw
6
Insert M4 Screw into housing boss as shown and
tighten to “finger tight”.
Insert Set Screw
Tighten Flange To Collar
7
Insert set screw into Flange (opposite of Radar
housing screw boss) as shown and tighten using
supplied hex key.
Final Tighten
8
After tightening set screw onto the Radar collar,
final tighten the M4 screw into the threaded boss
until secure.
Item # 361567 dwg# 361567 July 2015
©2015
WaterLOG
+1.435.753.2212
www.waterlog.com
