pHotoFlex
®
Turb
Operation
17
ba75976e07
09/2021
4
Operation
4.1
Switching on the meter
Switching on
Press the
<ON/OFF>
key.
For 30 seconds, the
Start
menu appears with a selection of the measuring
modes. The measuring mode last selected is highlighted.
The status line indicates the meter designation and the version number of the
software.
After a few seconds, the meter automatically switches to the measuring mode
and measured parameter used last.
The measured value display appears (here, e.g. measuring mode
Photome-
try
).
Press
<M>
(long pressure) to switch to the measuring mode.
Press
<M>
(short pressure) to switch between different measuring parame-
ters in the selected measuring mode.
Switching off
Press the
<ON/OFF>
key.
Automatic switch-
off function
The meter has an automatic switch-off function in order to save the batteries
or battery pack (see section 4.4). The automatic switchoff switches off the
meter if no key is pressed for an adjustable period.
The automatic switch-off function is not active
if the power is supplied by the power pack (optional),
if the power is supplied by the LabStation (optional),
if the
Timer
or
Analysis timer
function is on.
Photometry
Turbidity
pH & ORP
i
pHotoFlex
V
0.24
Start
Photometry
\
Concentration
i
Select program
with <PROG>
01.02.05 15:12
