pHotoFlex
®
pH
Operation
9
ba75977d04
11/2018
Initial commissioning
Switching on the meter
Press the
<ON/OFF>
key.
For a few seconds, the
Start
menu appears with a selection of the
measuring modes. The measuring mode last selected is highlighted.
After a few seconds, the meter automatically switches to the measuring
mode and measured parameter used last.
Setting the language
The English language is set on delivery. Set a different language as
follows:
Setting the date and
time
The date and time are set in the menu,
Configuration
/
System
/
Continue ...
/
Date/time
.
Operation
Inserting a cell
To be able to insert cells in the pHotoFlex
®
pH, the cell shaft has to be
prepared to take in a cell.
1
Open the
Configuration
menu with the
<MENU>
key.
2
Open the
Configuration
/
System
/
Language
menu with the
<
> <
>
and
<START/ENTER>
keys.
3
Select the required language with the
<
> <
>
keys and
confirm with
<START/ENTER>
.
4
Quit the menu with the
<M>
key.
1
Push the dust cover (1) upward.
The cell shaft for 28 mm cells is open.
Insert a 28 mm cell (see below)
Insert a 16 mm cell (see page 10)
1
